Gable trim, eave trim, gutter and downspouts included.

Not formulated for exterior use.

Boat storage facilities have unique space requirements. Boats and trailers can be long, tall, and difficult to maneuver, while the building needs to protect valuable equipment from weather and environmental exposure. A well-planned structure therefore needs generous clearances, practical access points, and an interior layout designed around the dimensions of the vessels being stored.

Butler’s pre-engineered steel systems provide the flexibility needed to create large, unobstructed storage environments. Clearspan framing can reduce interior obstructions, making it easier to organize boats, trailers, marine equipment, and service areas while maintaining circulation throughout the facility.

Butler also integrates its structural, roof, wall, and insulation systems as part of a coordinated building solution. This allows the facility to be designed around both its storage requirements and the environmental conditions of the site.

For larger marine facilities, Butler’s hybrid steel capabilities can also combine pre-engineered and conventional steel components when the project’s span, loading, or architectural requirements call for a more specialized structural solution.

Large, Unobstructed Storage Areas

Boat storage requires usable floor space without unnecessary interior columns interfering with vessel placement or trailer movement. Butler clearspan framing can create wide-open interiors that make better use of the available storage footprint.

Designed for Large Boat Access

Boats and trailers often require larger doors and greater vertical clearance than ordinary storage facilities. Door locations, dimensions, and surrounding structural requirements can be incorporated into the building design according to the vessels and equipment being stored.

Protection From the Elements

Boats represent a significant investment and can be exposed to rain, wind, sunlight, and other environmental conditions when stored outdoors. A properly designed enclosed steel building provides a controlled structure for protecting boats, trailers, parts, and marine equipment.

Durable Roof Performance

Butler’s MR-24® roof system is designed for long-term weather-tight performance and is engineered as part of Butler’s integrated building approach. This makes it a strong option for facilities where protecting stored assets from water intrusion is a priority.

Efficient Use of Interior Space

Clearspan construction can allow boats to be positioned more efficiently while maintaining circulation paths for trailers and service vehicles. Butler’s storage projects demonstrate how clearspan structural systems can improve interior organization and usable storage capacity.

Flexible Storage Configurations

A boat-storage facility can accommodate different vessel sizes, trailers, maintenance equipment, parts, and accessories. Butler’s customizable spans, heights, and finishes allow the building to be configured around the specific storage operation.

Conditioned Storage Options

For facilities requiring more controlled interior conditions, Butler insulation systems and insulated wall solutions can be incorporated into the building design. This can be particularly useful for marine service areas, offices, or storage spaces where temperature control is important.

Future Expansion Potential

Boat inventories and storage demand can change over time. Butler systems can be engineered with future expansion in mind, allowing owners to plan for additional storage capacity as the operation grows.

Efficient Construction

Butler’s pre-engineered components are engineered and fabricated before arriving at the jobsite, with factory-precise and pre-punched components designed to streamline assembly. Butler states that applicable PEMB projects can achieve installation timelines up to 50% faster than conventional construction.

What size boat can be stored in a Butler metal building?

There is no single standard boat size for a Butler storage building. The structure can be engineered around the dimensions and clearance requirements of the boats, trailers, and equipment being stored. Building width, clear height, door dimensions, structural spans, and interior circulation should all be established during the design process.

Designed Around Your Boats

Boat storage works best when the building is designed around the vessels it will actually accommodate. Boat length, beam, height, trailer dimensions, turning requirements, and access routes can all influence the building’s dimensions and door placement.

Butler’s customizable structural systems allow the building to be configured around these requirements. Clearspan areas can provide open storage zones, while separate spaces can be incorporated for offices, maintenance, parts, equipment, or customer areas.

Large Door and Access Configurations

The size and location of the building’s doors are particularly important for boat storage. Oversized openings can be planned around the dimensions of boats and trailers, allowing vessels to enter and exit the facility without compromising interior circulation.

For facilities storing multiple vessel sizes, the layout can incorporate different bay dimensions and access points to improve storage flexibility.

Roof and Wall Systems

Butler offers multiple roof and wall systems that can be selected according to the project’s performance and appearance requirements. The MR-24® roof system provides a durable standing-seam solution, while Butler wall systems can provide different levels of architectural appearance and performance.

Marine Service Areas

A boat-storage building can do more than house vessels. Service bays, repair areas, parts storage, offices, customer reception areas, and equipment rooms can be incorporated into the overall facility. This can turn a basic storage structure into a complete marine service operation.

Designed for Different Storage Needs

A private boat-storage building may require a simple open storage area, while a marina or commercial facility may need multiple storage bays, service areas, offices, and customer spaces. Butler’s integrated building systems provide the flexibility to scale the structure around the intended operation.

For larger or more complex facilities, Butler’s hybrid steel capabilities can also provide additional structural and architectural flexibility where conventional and pre-engineered systems need to work together.